KSB Etaline
Design
- Close-coupled design / in-line design
- Single-stage
- Horizontal installation / vertical installation
- Rigid connection between pump and motor
- Back pull-out design
- Fixed speed version (without PumpDrive 2 / PumpDrive 2 Eco / PumpDrive R) / variable speed version (with PumpDrive 2 / PumpDrive 2 Eco / PumpDrive R)
Pump casing
- Radially split volute casing
- In-line design
- Drive (fixed speed version) Standard design:
- KSB/Siemens surface-cooled IEC frame three-phase squirrel-cage motor
- Efficiency class IE1 (size 71/80) / IE3 (from size 90) to IEC 60034-30
- Rated voltage (50 Hz) 230 V / 400 V ≤ 2.20 kW ▪ Rated voltage (50 Hz) 400 V / 690 V ≥ 3.00 kW ▪ Rated voltage (60 Hz) - / 460 V ≤ 2.20 kW ▪ Rated voltage (60 Hz) 460 V / - ≥ 3.00 kW ▪ Type of construction IM V1
- Enclosure IP55
- Duty cycle: continuous duty S1
- Thermal class F with temperature sensor, 1 PTC thermistor (size 80/90) / 3 PTC thermistors (from size 100) Explosion-proof design:
- KSB surface-cooled IEC three-phase current squirrel-cage motor
- Efficiency class IE2 / IE3 to IEC 60034-30 ▪ Rated voltage (50 Hz) 230 V / 400 V ≤ 2.50 kW ▪ Rated voltage (50 Hz) 400 V / 690 V ≥ 3.30 kW ▪ Rated voltage (60 Hz) - / 460 V ≤ 2.50 kW ▪ Rated voltage (60 Hz) 460 V / - ≥ 3.30 kW ▪ Type of construction IM V1 ▪ Enclosure IP55
- Duty cycle: continuous duty S1
- Type of protection EEx eb II
- Temperature class T3
Drive (variable speed version) KSB SuPremE motor
- Surface-cooled KSB SuPremE motor, IEC-compatible, magnetless synchronous reluctance motor (PumpDrive 2 / PumpDrive 2 Eco / PumpDrive R required)
- Efficiency class IE4/IE5 to IEC TS 60034-30-2:2016
- Mounting points to EN 50347:2001
- Envelope dimensions to DIN VDE 42673-4:2011-07
- Type of construction IM V1
- Enclosure IP55
Duty cycle
- Continuous duty S1
- Thermal class F with temperature sensor, 3 PTC thermistors
- Shaft centreline height 71 to 225 mm ▪ Rated power 0.55 kW to 45 kW
- Rated speed 1500 rpm or 3000 rpm
- Frequency 50 Hz / 60 Hz (PumpDrive input) ▪ Voltage 380 V to 480 V (PumpDrive input)
KSB SuPremE X1
- With terminal box for connecting to PumpDrive 2 or PumpDrive R for mounting on walls and in control cabinets KSB SuPremE X2:
- Equipped for being fitted with a motor-mounted PumpDrive 2 PumpDrive 2 / PumpDrive 2 Eco:
- Self-cooling frequency inverter of modular design for the continuously variable speed control of asynchronous motors and synchronous reluctance motors by means of analog standard signals, a field bus or the control panel
- Identical design of frequency inverter for motor mounting, wall mounting and cabinet mounting
- Mains voltage 3~ 380 V AC -10 % to 480 V AC +10 %
- Mains frequency 50 Hz to 60 Hz ± 2 % PumpDrive R:
- Self-cooling frequency inverter of modular design for the continuously variable speed control of asynchronous motors and synchronous reluctance motors, such as KSB SupremE motors or permanent magnet synchronous motors, by means of analog standard signals, a field bus or the control panel
- Identical design of frequency inverter for the mounting types wall mounting and cabinet mounting
- Mains voltage 3~ 380 V AC -10 % to 480 V AC +10 % ▪ Extended mains voltage range (on request) ▪ Mains frequency 50 Hz to 60 Hz ± 2 % ▪ Extended power range with a nominal power of 110 kW (standard) or 1400 kW (on request)
PumpMeter
- Intelligent pressure transmitter for pumps, with on-site display of measured values and operating data
- For recording the load profile of the pump
- Supplied completely assembled and parameterised for the individual pump
Shaft seal
- Standardised mechanical seal to EN 12756 Shaft equipped with replaceable shaft protecting sleeve in the shaft seal area
Impeller type
- Closed radial impeller
Bearings
- Radial ball bearings in the motor housing. Grease lubrication
- Air-conditioning systems
- Cooling circuits
- Heating systems
- Water supply
- Industrial recirculation systems
- Heat recovery systems
- Service water supply systems
Versatile
- Flexible installation thanks to in-line design.
- Flange connections drilled to EN or ASME accommodate for a wide application range.
- Large choice of impeller materials.
- Standardised mechanical seals from Code 6 to 11 as a standard.
- Hydraulic test run to ISO 9906 3B, 2B und 2U available.
- Wide choice of seals for demanding fluids.
- Available in a wide choice of materials for a large variety of fluids.
Service-friendly
- Replaceable casing wear rings.
- Service available worldwide.
- Fast availability of spare parts.
Reliable
- Low vibration levels and very smooth running.
- Confined casing gasket.
- Designed for up to 16 bar operating pressure.
- High reliability thanks to twin pump design.
- Wetted parts are free from primers and thus generally recognised as safe for handling drinking water.
Energy-efficient
- Advanced hydraulic system for high efficiency.
- The impellers are trimmed to the operating point as a standard.
- Ground-breaking features for saving energy. Equipped with PumpDrive for variable-speed operation. When used in combination with the KSB SuPremE® motor, the pump achieves the efficiency level IE5*.
